Rear Speaker Door Pods- Fit Your Own Speakers
Need more information? View our Speaker Door Pods FAQ page.
Rear Speaker Door Pods (Lead vinyl- mid grey colour) + a custom size hole to suit a speaker of your choosing. Constructed from medium density fibreboard to dampen speaker vibration and enhance sound quality.
Important notes:
- Please specify the speaker brand and model you'd like to use in the box below. We can cut provisions for most speaker shapes and sizes. If we have any issues or concerns with the speaker model you have specified, we will get in touch with you before manufacturing your product.
- If your speaker selection is larger than 6.5" diameter for a round speaker, larger than 6x9" for an oval speaker or includes a tweeter, please get in touch with us over the phone to place an order. We may need to check and confirm the speaker size is suitable before proceeding.
If you haven't purchased your speakers already, consider one of our options with speakers included- We have selected two speaker models so that you (or your installer) can fit without cutting any holes in the steel door frame. Most depth and magnet shape of most speakers will require you (or your installer to cut some steel out of the door frame). The options below will not require you (or your installer) to cut any steel:
- Rear Speaker Door Pods w/ Alpine Type R Speakers (view these speakers on the Alpine website here)
- Rear Speaker Door Pods w/ Focal ISU-165 Speaker (view these speakers on the Focal website here)
If you would like to specify your own speaker brand/ model it is likely you will need to cut the steel door frame to allow for the size and depth of the speaker magnet. This means the installer will need to vacuum and wash out the door frame (to remove any steel shavings that have landed inside the door), apply a rust proofing paint, and fish oil (or similar) for extra protection from rust.
Low profile and lightweight- our Speaker Door Pod is 30mm thick (at the thickest point- front end) and less than 1.5kgs (per side, without the speaker installed)
Factory look- the shape of our Speaker Door Pods follows the lines and contours of the 70 Series LandCruiser for a factory look. Our exclusive Lead vinyl is custom made to match the door trim colour (mid grey).
Easy to fit, no cutting holes in steel- You (or your installer) will not need to cut any holes in the steel door frame to fit this product. The shape of the Speaker Door Pod, position of the speaker and shape of the speaker magnet allow the speaker magnet to fit in an existing hole in the steel door frame.
Manufacturing time:
Our products are hand made right here in Sydney. Our current manufacturing time for this product is 4-6 weeks + transit time. If you have an upcoming trip that you require a console for, you're welcome to get in touch with us on (02) 9546 7914 or sales@consoles.com.au- we will do our best to meet realistic deadlines.
Need more information? View our Speaker Door Pods FAQ page.
