Full Length Floor Console (Design 10) to suit (July 2009+) 78 Series TroopCarrier
Please View Our LEAD TIME CATEGORY Page
Need more information? View our Full Length Floor Console FAQ page.
The following accessories come standard in our Full Length Floor Console:
- + Two jumbo size plastic cup holders (for dimensions, visit our FAQ page)
- + Removable plastic L Shape Tray (for dimensions, visit our FAQ page)
- + Manual gear boot
- + Padded lid/ armrest
- + Installation hardware and instructions
Note: Please not that the image used for this photo is outdated. We now place the ScangaugeII/Scangauge3 provision above the gear stick on the driver side, and the 12v and dual USB sockets on the passenger side. This is a more optimal layout for accessing the ScangaugeII/Scangauge3 and charging sockets.
The following accessories are included in this Full Length Floor Console design (Design 10):
- + ScanGaugeII or Scangauge3 provision. Position - front, Driver side above the gear stick (view this product on the ScanGauge website)
- + Narva Heavy-Duty 12v and dual USB sockets. Position - front, Passenger side.
Note: This pricing does not include the ScanGaugeII/Scanguage3 unit. If you require us to supply this, please choose this add on below.
For all TroopCarrier models with rear seats- the shape of the Full Length Floor Console prevents the front passenger's seat extension, which will limit the space rear passenger's have to climb through to the rear seats of the vehicle.
Other accessories compatible with this console:
- + Ripstop canvas storage lining (with a sewn in pocket for cables, phone, wallet etc.) to replace standard vinyl storage lining.
- + Rear Wedge with 2 fold up cup holders (79 Series Dual cab & 76 Series StationWagon only)
- + Canvas lid cover (grey or black canvas)
- + Two jumbo cup holder disks (view our FAQ page for more information)
Product dimensions:
2009 and on 78 Series TroopCarrier + 2009 to 2016 79 Series Single Cab
- Height: 380mm (incl. armrest/ padded lid)
- Width between the seats: 190mm
- Length: 910mm (at longest point on the driver side)
Important Note for 78 Series TroopCarrier Owners with factory 5 Seater Models:
Our standard consoles don't allow full extension of the passenger side seat. If you plan on retaining the rear bench seat, full extension of the front passenger seat may be required to allow rear passengers the easiest possible access to the rear bench seat.
The information above does not apply to vehicles with RECARO seats installed
In addition to the obstruction and solutions outlined above, the front shape of the Full-Length Floor Console flares out to align the front accessory facia with the shape of the dashboard and also allow for the plastic L tray. This reduces the ability to slide the front passenger forward by approximately 30-40%. This does still allow for passengers to access the rear bench albeit more difficult than standard.
Solution:
We can offer a modified front shape to allow approximately 90% of the front passenger seat extension (100% is not achievable). This modification involves changing the layout of the console from two cup holders and an L-tray to 2 cup holders and a smaller square pocket. This does not affect the front accessory facia.
Points of interest:
- Custom built- the front accessories facia is on an ideal angle to fit accessories you will need to see and operate while driving. You have the opportunity to fit accessories including: a remote head or super compact size UHF radio (e.g. GME TX3520S, GME TX3120S, or Uniden UH9000), ScanGauge II, Rocker Switch Panel, 52mm gauges, on board air compressor control (e.g. Airbag Man) etc. We manufacture all consoles to order. If our 'standard'/ popular layouts do not display what you are looking for, feel free to contact us on (02) 9546 7914 or via email.
- Built tough- this product is constructed with exterior grade, marine bonded plywood.
- Allows for seat adjustment- the driver’s side of the console has a carpeted recess. This recess allows is for the seatbelt to tuck into the console when the driver’s seat is extended forward. This recess allows for full extension on the driver’s seat, without any rubbing or damage to the console.
- Easy to clean- the ABS plastic cup holders and L shape storage tray, and the internal lining are all removable. You can easily take these items out of the console to clean.
- French Seam upholstery- our product has a professional soft padded vinyl finish.
- Colour match to your interior- our DeluxeTrim Door vinyl matches the grey dashboard, steering wheel, glove box etc. our DeluxeTrim Black vinyl matches the black instrument panel in the centre of the dashboard.
- No rattles- we use ABS plastic instead of metal for our cup holders and storage tray to avoid any rattles from coins, cans, metal coffee mugs etc.
- Easy to fit- this product has galvanised steel mounting brackets positioned to locate existing captive nuts in the floor. No holes to be drilled or damage to the vehicle! Installation hardware and clear installation instructions are included. If you'd like to have this product supplied and installed by one of our recommended distributors, check out our Find a Local Distributor Page.
- Comfortable armrest height- view the product dimensions for the height of the top of the padded lid off the floor.
Need more information? View our Full Length Floor Console FAQ Page.
