Front Speaker Door Pods + Waterproof Door Trims- With Custom Options + Recommended Speakers (79 Single Cab + 78 TroopCarrier)
Need more information? View our Speaker Door Pods FAQ page.
## Note, the door trims on this listing do not include the custom embroidery as displayed in the photos of our DEMO vehicle. Please contact us over the phone or via email for custom embroidery enquiries ##
The starting price ($700.00) includes one Pair of Front Speaker Door Pods AND one Pair of Front Door Trims. The Speaker Door Pods are constructed with a combination of medium-density fibreboard to dampen speaker vibration and enhance sound quality and exterior grade plywood backing board for water resistance. The Door Trims are ABS plastic trim boards. Both are pholstered in our custom made Lead Indent Vinyl to match your door trims. Our Speaker Door Pod is 30mm thick (at the thickest point- front end) and less than1.5kgs (per side, without the speaker installed).
We began offering replacement door trims after commonly seeing water damaged (caused by rain or river crossings) masonite door trims. Please note, the custom embroidery displayed in the photo (of our DEMO vehicle) is not included, please contact us for custom embroidery enquiries.
Below is some additional information about the OPTIONS you can select from below:
(Refer to the third photo above) TWEETER PILLAR PODS (as displayed in our DEMO vehicle). These are custom made by 4x4 Concepts. The pods are painted the same colour as the factory pillar covers. If you order your speakers with us, we will mount the tweeters for you at no additional cost.
Why do we recommend the SPEAKER OPTIONS listed below specifically?
For 79 Series Single Cab and 78 Series TroopCarrier owners only; the following speaker models can be installed without cutting any steel out of the door frame. No damage, no steel swarf!
- Focal ICU165
- Focal ISU165
- Alpine R-S65.2
- Alpine R-S65C.2(Refer to the fourth photo above)
USB CHARGING OUTLETS. Can you ever have enough? We can install one Narva 81144 (Heavy-Duty Dual USB Socket) to each Speaker Door Pod. A perfect spot to charge for your tablet or GPS!
(Refer to the fifth and sixth photo above) MIDRANGE MOUNTS (as displayed in our DEMO vehicle). These mounts allow you to fit the midrange speakers in the factory 4" speaker location. The mounts are made from ABS plastic and screw into the factory 4" speaker mounting points (no holes to drill). Note, these are not an option listed below, they are included at no additional cost with all 3-way component kits (e.g. Focal ES 165 KX3)
DOOR POCKET OPTIONS. If you have a GX or GXL model, your vehicle is likely to have factory plastic door pockets. We cut provisions for you to refit these pockets to the Speaker Door Pods (no additional charge). If your vehicle does not have factory door pockets, we can supply you with the factory Toyota pockets for $110 per pair. The most popular option is to upgrade to our DOTI ABS Door Pockets with drink holders (as displayed in our DEMO vehicle).
## IMPORTANT NOTE For 79 Series Single Cab owners (DPF models only) ##
Our DOTI ABS pocket option is not suitable for the 2016+ 79 Series Single Cab with factory bucket seats because the pocket touches the plastic cover/ surround on the outboard side of the bucket seat on both sides of the vehicle. The 2016+ 79 Series Single Cab is the only 70 Series model that has these plastic covers/ surrounds.
For customers with factory bucket seats:
- We recommend re-using the factory door pockets only (no DOTI ABS pocket option)
For customers with aftermarket seats installed:
- The customer can measure between the door trim and the seat to check the Speaker Door Pods + DOTI ABS pockets will fit. The depth of our Speaker Door Pods + DOTI ABS pocket is approx. 77mm (measured at the 'storage pocket' area; the 'drink holder' area is deeper). Aftermarket seats are likely to be suitable for our Speaker Door Pods + DOTI ABS pockets because they do not have the plastic cover/ surround.
Need more information? View our Speaker Door Pods FAQ page.
