T Shape Roof Console (Design 1)
SKU:
A$1,144.00
A$1,144.00
per item
Need more information? View our T Shape Roof Console FAQ page.
The following accessories are included in this T-shape Roof Console design (Design 1):
- + Four storage openings with elasticised netting, internal carpet lining and internal dividers
- + A provision to remount the factory interior light
- + Directional aluminium LED map lights with switches
- + A UHF radio provision on the driver's side angled facia (the UHF radio is not included in this listing, you may add a UHF radio to your order by selecting one from the 'Additional Accessories' below).
Other accessories compatible with this console:
- + Add a GME UHF Radio- view the options at the bottom of this page. We are an authorised GME dealer.
- + Narva LED globe to replace the globe in the factory interior lights
- + Narva 87509 LED Light with 3 way switch (to operate on ON/DOOR/OFF settings) - includes silver bezel (to replace standard white bezel). This product will replace the factory Toyota interior light (view this product on the Narva website here).
- + Narva Accessory/ Dual USB Sockets (part number 81144)- the USB will be fitted to the driver's side at the rear of the console + Accessory will be fitted to the passenger's side at the rear of the console.
Points of interest:
- Custom built- We manufacture all consoles to order. If our 'standard'/ popular layouts do not display what you are looking for, feel free to contact us on (02) 9546 7914 or via email.
- Built tough- this product is constructed with exterior grade, marine bonded plywood.
- Designed for maximum headroom- the depth of the console at the rear (measured from where the interior light is positioned) is 115mm. Installation of this product does not require you to relocate the sun visors or grab handle(s).
- French Seam upholstery- our product has a professional soft padded vinyl finish.
- Colour match to your interior- our Cruiser Indent vinyl matches the light grey roof lining, sun visors, pillars etc.
- Easy to fit- this product has galvanised steel mounting brackets positioned to locate existing captive nuts and screw holes in the vehicle. No mounting holes to be drilled in the vehicle! Installation hardware and clear installation instructions are included. If you'd like to have this product supplied and installed by one of our recommended distributors, check out our Find a Local Distributor Page.
Need more information? View our T Shape Roof Console FAQ page.
Manufacturing time:
Our products are hand made right here in Sydney. Our current manufacturing time for this product is 10-12 weeks + transit time. If you have an upcoming trip that you require a console for, you're welcome to get in touch with us on (02) 9546 7914 or sales@consoles.com.au- we will do our best to meet realistic deadlines.
