Rear Side Consoles
Frequently Asked Questions
Frequently Asked Questions
Q: How big are the jumbo cup holders?
A: The internal diameter of our jumbo size cup holders is approximately 88mm. The internal depth is 75mm, including a smaller diameter 'tier' in the bottom to accommodate can size drink containers.
Q: Can you fit a can with a stubby cooler in the cup holders?
A: Yes! Just add the jumbo cup holder disks to your order. Our jumbo cup holder disks are a disk/ doughnut shape piece of flat plastic that sits in the jumbo cup holder to level out the two tiered design, making it suitable for drink sizes in between the two set diameters e.g. a large sports drink (Maximus) or stubby cooler diameter.
Q: How big is the square storage pocket?
A: External size- 105mm square, 78mm deep
Internal size- 85mm square, 78mm deep
Q: What do the colours match?
A: Here are our standard vinyl colour options:
Q: Do I need to drill any holes into my vehicle to fit this console?
A: No. We supply new trim panels (elephant trunk shape) to replace the factory masonite trim panel. The new trim panel is secured using the factory black ‘Xmas Tree Clips’. No holes to drill and no damage to the vehicle! Installation takes 20-30 minutes per side (this is a reasonable time for someone that is installing this product for the first time).
Q: Where do you route the wiring charging sockets for the Rear Side Consoles- Premium Option
A: You can route the cabling underneath the plastic sill trims on each side of the vehicle.
Q: What can the Rocker Switch Panel be used for?
A: We have fitted switches for awning lights (so that you can open the door and click the switch under the awning), compressor (which was fitted behind the bucket seat), additional USB outlets (Narva 63218BL), rear seat heating pads etc.
Q: Do the Rear Side Consoles obstruct anything?
A: No. the Rear Side Console shape is designed to fit in the unused space on each side of the bench seat. The consoles do not obstruct operation of the seat belt, folding the bench seat forward, or the passenger entering and exiting the vehicle (even with a tall bottle in the cup holder).
Q: What is the console made out of?
A: Our products are constructed with exterior grade, marine bonded plywood and finished with soft padded vinyl upholstery to match your interior.
Q: What charging outlets do you use?
A: We use the Narva Australia Heavy-Duty Twin Accessory/Dual USB Sockets
Q: Can you fit stainless steel cup holders?
A: We use ABS plastic instead of metal for our cup holders and storage tray to avoid any rattles from coins, cans, metal coffee mugs etc.
Q: Do you offer custom upholstery?
A: Yes, absolutely. Our most popular colour options are dark grey to match the dashboard, or black to match centre instrument panel, however we do offer this product in any colour of your choice. If you've had some other work done to your interior and would like to match the material you have already used, we can upholster the console in the same material. We have accounts with most suppliers in Australia and can most likely source the material to match. You can get in touch with our sales team over the phone or via email to discuss pricing and options.
A: The internal diameter of our jumbo size cup holders is approximately 88mm. The internal depth is 75mm, including a smaller diameter 'tier' in the bottom to accommodate can size drink containers.
Q: Can you fit a can with a stubby cooler in the cup holders?
A: Yes! Just add the jumbo cup holder disks to your order. Our jumbo cup holder disks are a disk/ doughnut shape piece of flat plastic that sits in the jumbo cup holder to level out the two tiered design, making it suitable for drink sizes in between the two set diameters e.g. a large sports drink (Maximus) or stubby cooler diameter.
Q: How big is the square storage pocket?
A: External size- 105mm square, 78mm deep
Internal size- 85mm square, 78mm deep
Q: What do the colours match?
A: Here are our standard vinyl colour options:
- Lead Vinyl- this is an exclusive vinyl we have had custom made to match the colour of the door trims and plastics on the factory seats.
- 301 Black Vinyl- this is a match to the black accessories in the vehicle, for example the black instrument panel in the centre of the dashboard. The colour and grain match that of the handbrake handle and gear shifter knob.
Q: Do I need to drill any holes into my vehicle to fit this console?
A: No. We supply new trim panels (elephant trunk shape) to replace the factory masonite trim panel. The new trim panel is secured using the factory black ‘Xmas Tree Clips’. No holes to drill and no damage to the vehicle! Installation takes 20-30 minutes per side (this is a reasonable time for someone that is installing this product for the first time).
Q: Where do you route the wiring charging sockets for the Rear Side Consoles- Premium Option
A: You can route the cabling underneath the plastic sill trims on each side of the vehicle.
Q: What can the Rocker Switch Panel be used for?
A: We have fitted switches for awning lights (so that you can open the door and click the switch under the awning), compressor (which was fitted behind the bucket seat), additional USB outlets (Narva 63218BL), rear seat heating pads etc.
Q: Do the Rear Side Consoles obstruct anything?
A: No. the Rear Side Console shape is designed to fit in the unused space on each side of the bench seat. The consoles do not obstruct operation of the seat belt, folding the bench seat forward, or the passenger entering and exiting the vehicle (even with a tall bottle in the cup holder).
Q: What is the console made out of?
A: Our products are constructed with exterior grade, marine bonded plywood and finished with soft padded vinyl upholstery to match your interior.
Q: What charging outlets do you use?
A: We use the Narva Australia Heavy-Duty Twin Accessory/Dual USB Sockets
Q: Can you fit stainless steel cup holders?
A: We use ABS plastic instead of metal for our cup holders and storage tray to avoid any rattles from coins, cans, metal coffee mugs etc.
Q: Do you offer custom upholstery?
A: Yes, absolutely. Our most popular colour options are dark grey to match the dashboard, or black to match centre instrument panel, however we do offer this product in any colour of your choice. If you've had some other work done to your interior and would like to match the material you have already used, we can upholster the console in the same material. We have accounts with most suppliers in Australia and can most likely source the material to match. You can get in touch with our sales team over the phone or via email to discuss pricing and options.
